With the motto “A TV for every room, in every home,” the American consumer electronics firm Element Electronics, headquartered in South Carolina, is dedicated to providing television that meets the entertainment needs of a diverse variety of clients. It offers unrivaled and feature-rich technology as well as the most fashionable TV sets at reasonable costs.
However, your Element TV may occasionally fail to function properly. However, there may be several issues that can be resolved with a basic degree of Element TV Troubleshooting.
This tech blog post will go over troubleshooting for a few typical Element TV problems (such as blank screens, functional issues, audio issues, and picture issues, among others).
Table of Contents
Troubleshooting Element TV Blank Screen Issue:
If you have a black screen on your Element TV, you should troubleshoot it as follows:
- Unplug your television from the power outlet.
- Allow it to sit unplugged for a time.
- Press and hold the Power button for roughly 20-25 seconds while the TV is unplugged.
- Release the power button and then reconnect the TV.
- Check to see whether you can see a picture on the TV screen by turning it on manually or using the remote control.
Troubleshooting Element TV Functional Issues: TV turns ON and OFF automatically
When you have a problem with your TV’s functionality, such as it turned on and off automatically. The troubleshooting steps listed below may assist you in resolving the issue.
- Turn off your TV and unhook it from the wall.
- Allow it to sit unplugged for a time. Meanwhile, press and hold the Power button for around 20-25 seconds.
- Remove the power button and reconnect the TV to the power socket.
- Turn on the TV manually or with the remote control and see if it works normally.
- If the problem persists, you can attempt the next solution listed below…
Perform a Reset/Factory Reset
To reset the television, follow the instructions below:
- Select the Setup option after pressing the Menu button on the TV Remote.
- Select the Restore Default option to reset your television.
The TV will restart after a few seconds if you reset it. If it does not turn on, turn it on manually or use the remote control. Hopefully, the issue has been corrected.
Troubleshooting Element TV Audio Issues: TV has picture but no sound?
You must confirm the following before proceeding with the Audio difficulties on Element TV procedure:
- Check to see if you’re seeing this problem on all channels. If it does, proceed to the next steps.
- Check the TV speakers for functionality by completing the following:
- On your TV remote, press the “MENU” button.
- Scroll down to find and select SETUP.
- Here Choose Voice Guide and turn it on.
If you can hear the TV Voice Guide feature clearly, there is no problem with the speaker, and the sound problem is due to Broadcasting or Cable service.
If the Voice Guide is not within hearing distance, you must perform the following troubleshooting procedures…
- Remove your Element TV from the power supply.
- Leave it unplugged while simultaneously pressing and holding the Power button for roughly 20-25 seconds.
- Release the power button and then reconnect the TV.
- Turn on the television manually or with the remote control and check to see if the sound is heard.
If the problem persists, you can attempt the next solution listed below…
Perform a Reset/Factory Reset
To reset the television, perform the following steps:
- Select the Setup option after pressing the Menu button on the TV Remote.
- Look for and select Restore Default to reset your TV.
Wait for the television to restart. If it isn’t, turn it on manually or with Remote Control.
Troubleshooting Element TV Picture Issue: TV has sound but no picture?
In contrast to the preceding case, if you can hear the sound on your TV but cannot see any picture on the screen, follow these steps to troubleshoot the picture problem:
- Unplug the television and, while it is unplugged, press and hold the Power button for around 20-25 seconds.
- Release the button and reconnect the power cable to the socket.
- Turn on the TV manually or with the remote control to see if you see a picture on the screen.
Troubleshooting Element TV won’t turn ON Issue
When your Element TV won’t power on, use the troubleshooting procedures outlined below:
- Check to see sure the TV is getting enough power.
- Check for any loose connections.
- Check that the power cords are securely connected.
- After checking the above criteria, if the LED does not light up white, your TV may be in standby mode.
- While in standby mode, use your remote to push the Standby or Power button.
Troubleshooting Element TV No Signal Issue
The following procedures can be taken to address this issue:
- Check that your TV is set to the correct input.
- Check that the signal wire is securely attached and is not loose.
Examine the antenna connectors. - If the signal is out of range, you should think about altering the resolution as well as the horizontal or vertical frequency. You should also think about relocating and repositioning the antenna.
In addition, unplug all cords (including the HDMI cable) and replug them.
Note: If the issue persists after executing the Element TV troubleshooting instructions, you must contact the Element TV Customer Support Team at 888-842-3577.